Construction and material costs have risen dramatically over the last year, making budgeting for a home renovation more challenging than ever. It’s often the decorative elements that get sacrificed to keep the budget on track. And lighting tends to be one of the first casualties. But lighting is such an important design feature, critical to creating the right atmosphere in your home. I chatted with lighting expert Willie Duggan Jr. from Willie Duggan Lighting to get some affordable lighting ideas that still achieve maximum impact for each area of the home.
Less is more
Use downlights sparingly and in the right locations. Recessed spotlights or downlights have become the go-to lighting solution, but they are not always the right or best choice. “Rooms are frequently overlit,” says Duggan. “We often see the scenario where there are downlights everywhere when many are not needed,” he explains.
You don’t need to pepper the ceilings with downlights. When planning a lighting scheme, look at each room and minimise the number of downlights. The best way to do this is by placing them in precise locations only where they are required, like over the worksurface in a kitchen.
Being more considered in your approach will also allow you to focus on using better quality fittings that will last and perform better, saving money in the long run. “Better quality fittings are more efficient,” explains Duggan. Using fewer but better quality fittings will also reduce the number of wiring points you need, giving you a saving on the installation.
Getting the right advice in the early stages of your project can save you money and early expert input will guide how best to use your budget to yield the best returns. They’ll advise on where to spend and where to make compromises on your lighting scheme.
Planning ahead will also mean you’ll have time to get things priced and make decisions at your own pace. Making decisions when your electrician is on-site can be difficult and stressful. Quite often, with aesthetic choices, you need time to mull them over. It can be almost impossible to make a good decision under pressure. Being prepared will mean you’ll know what you want to do when the work starts and most importantly, you’ll have peace of mind you are making the right decisions.
Take your time
Don’t put yourself under pressure to have everything finished straight away. For example, pendants can be fitted later if the budget isn’t available for the fitting you want. Install the wiring point and fit an inexpensive temporary fitting or blank off the cabling until later.
Sometimes allowing things to evolve yields a better result. By taking your time, you’re more likely to invest in a quality fitting that will last than rushing out and buying something that may end up in a skip and contributing to landfill.
The most important consideration is ensuring the cables are in the correct position. The fitting itself can come later. Realising you put a cable in the wrong place and trying to change or add in a fitting later can be messy, disruptive and costly.
Be clever about where you spend
Try to prioritise where you spend your money. “You can work to most budgets and still create good bang for your buck,” says Duggan. You might decide to invest in the areas you’ll be spending a lot of time in, like the kitchen etc. and pull back in other rooms. But even in spaces where you are looking to cut back, it’s possible to achieve an attractive result cost-effectively. In a bedroom, for example, using a drum pendant with a diffuser and some beautiful bedside lights is a lovely and inexpensive way to create a gentle and relaxed atmosphere.
LED tape can be used for hidden lighting and is an extremely cost-effective way to add atmosphere and impact to your home. A 5-meter roll costs approx €500. It can be used to wash walls with light or as an accent light source in a wall or ceiling recess. It can also be used in built-in joinery to illuminate shelving or as feature lighting along skirtings. The builder will need to create the recess to hide the light strip, so it’s advisable to consider these details early in the design process.
LED bulbs are 5-10 times more efficient than older bulbs. So make sure all the bulbs in your home are LED. This easy swap will save you money straight away.
Sensors that turn the lights on only when someone is in the room are good, but only in specific spaces. For example, they can be problematic in living areas as they only keep the lights on if someone is moving around. They are better suited to cupboards, pantries or wardrobes.
There are lots of portable Bluetooth and wireless lamps available. Designed for ambient lighting, they are ideal when you want to add a light for atmosphere but don’t have a power source. They can be moved easily from room to room, and many fittings are suitable for indoor and outdoor use. They are not ideal for reading or task lighting as their output is typically between 300-400 Lumens. For reading, you need about 600-700 Lumens. But technology is moving quickly, so expect significant advances in this area in the next few years.
Share This Post
Do you know someone who could benefit from this blog post? Why not share the link to this post with a friend who you think would enjoy our content? Or share the post on your favourite social channel with the hashtag #optimisehome. We count on you to spread the word about the blog, so thank you for helping us get the blog in front of new readers.